HEC (EFEI) Chip for Cars

Expand
#

This dynamic NEW HEC CHIP has been engineered specifically for use on vehicles using H2 Generators to save even more fuel and increase power response!

Eliminates the need for any controllers;
Easy to hook up - comes with quick conectors;
No adjustments needed, automatically sets itself;
No Multi-meter needed - nothing to read or adjust;
Does not touch or modify any existing sensors;
Attaches to wiring harness in back of OBD2 port

189.97 EUR
99.00 EUR


Manufacturer

VOLO PERFORMANCE

SKU

601361-L579Y

Weight

0,2 kg
189.97 EUR
99.00 EUR


In the early days of H2 technology, many vehicles were unable to have fuel savings higher than 30% due to the strict parameters of their computer management systems. These cars have electronic fuel injection with advanced ECUs (Engine Control Units with Euro modules IV and V) and some would simply not allow fuel economy to improve beyond certain programmed values.

As H2 technology advances, more vehicles are able to benefit despite these ECU limitations. The new H2 EFIE Chip (HEC) is one of the newest products to address and solve the limitations of many modern vehicle ECUs.

With the new H2 HEC your fuel savings can go up siginifically. When using hydrogen gas as a fuel supplement, the HEC will adjust fuel delivery and timing to optimize efficiency. When H2 gas is disabled, the HEC will automatically re-adjust and switch to highly efficient, non-H2 enhanced maps.

What is a H2 – EFIE Chip?
 
The HEC is a chip, with a 200 mhz microprocessor, It utilizes its high speed serial input/output to communicate directly with the ECU through the OBD-II port It has been specifically developed and tuned for the needs of H2 generator equipped vehicles. The HEC is dynamic - which means the HEC will consider oxygen levels in the exhaust, along with engine speed and load, intake air temperature and volume, and many other variables to determine the most efficient fuel delivery rate and timing at up to 256 separate load points.

When using H2 as a fuel supplement, the HEC will adjust fuel delivery and timing to optimize efficiency. When H2 is disabled, the HEC will automatically re-adjust and switch to highly efficient, non-H2 enhanced maps.

The HEC is a vehicle specific, custom programmed 20MHz Microcontroller. It utilizes its high speed serial input/output to communicate directly with the ECU through the OBD-II port.

The HEC is compatible with factory equipped Turbo/Superchargers, diesel engines, Flex-Fuel, & H2 supplement systems. It is NOT compatible with hybrid engine options, propane, or natural-gas.

How does the H2 EFIE Chip (HEC) Works?
 
Inside every ECU there is a three dimensional table of values called a Map. This table tells your fuel injectors exactly how much fuel to deliver based upon current air temperature, density, engine speed, throttle position, and other variables.

From the factory, the Map is generic and designed to provide a sluggish, no-surprises style of driving that suits a wide range of drivers. It is especially ignorant to the benefits of H2 systems and their ability to burn fuel at a much greater air to fuel mixture ratio than usual.

H2 EFIE Chip corrects this problem by providing a pre-programmed and highly tuned Map for the ECU to reference. The tuned Map contains a set of variables that directly allow a better fuel efficiency. When the ECU attempts to read specific factory settings, the Flash Chip patches the factory value with one from its tuned Map.

In this way, when the HEC Chip recognizes an H2 system is operating, parts of the factory Map are temporarily replaced with improved variables from the tuned Maps. This technique safely unleashes your engine's ability to use less fuel and it doesn't void the warranty.

And yes, it's easy to remove and restore the computer to factory settings when desired.

How to Install?
 
Simply locate the OBD-II port, connect the HEC Chip to four wires found BEHIND the port, and you're done. Bring the vehicle up to operating temperature and then press the reset button to start saving fuel.

Whats the difference between the normal Chips and the HEC?
 
The HEC is much faster than the regular Chip, which means faster & more consistent gains. The HEC also sports more memory than the regular Chip, so we are able to include more H2 specific coding.

Additional Information
 
Our HEC Chips do not work with hybrids, propane nor natural gas vehicles. Each unit is ready to install per the provided instructions.

The HEC is compatible with factory equipped Turbo/Superchargers, diesel engines, Flex-Fuel, & H2 supplement systems.

This dynamic NEW HEC CHIP has been engineered specifically for use on vehicles using H2 Generators to save even more fuel and increase power response!

  • Eliminates the need for any controllers;
  • Easy to hook up - comes with quick conectors;  
  • No adjustments needed, automatically sets itself;
  • No Multi-meter needed - nothing to read or adjust; 
  • Does not touch or modify any existing sensors;
  • Attaches to wiring harness in back of OBD2 port

Simple to install, easy-to-follow instructions; connects to the back of the OBII data link connector with only 4 wires.

Back